6 720 801 244 (2013/08) Compress 3000 DW FO
22 | Installation instructions
3. Condensate lines are in place
• Condensate drain pipe connected to drain connection, and
directed into a floor drain or a condensate pump
4. Temperature and pressure-relief valve is working and
drain line completed per local code.
5. Electrical connections
• Electrical connections are properly isolated
6. Verify control panel displays 60 °C.
7. Front cover is in place.
WARNING:
The power supply to the appliance must not
be activated until the system is filled with
water.
To Next Page
Loading...
