33
Condens 5000 W – 6720644144 (2019/03)
Carry out thermal disinfection
▶ Turn hot water temperature control clockwise as far as the stop (approx. 70 °C).
Fig. 15
▶ Wait until the water reaches the maximum temperature.
▶ Draw off water in turn from the nearest to the furthest hot water point until hot
water has been running out at a temperature of 70 °C for 3 minutes.
▶ Reset DHW temperature control, circulation pump and heating programmer to
their standard settings.
If you want to interrupt thermal disinfection:
▶ Switch the appliance off and then on again at the main switch.
The appliance will start up again and the central heating flow
temperature will be displayed.
6 720 644 143-33.1O
max
1
2
34
5
6
reset
eco
max
1
2
3
4
e
6
To Next Page
Loading...
