35
Condens 5000 W – 6720644144 (2019/03)
Tips on saving energy
Thermostat
Fully open the thermostat to ensure that the required room temperature is reached
in all cases. Only after the required temperature has been reached and maintained
for an extended period of time should you change the setting for the heating curve or
the room temperature on the controller.
Underfloor heating
Do not set the heating-up temperature higher than the maximum level recommended
by the manufacturer.
Ventilating
Do not keep windows slightly open for ventilation purposes. This would continuously
cool down the room without significantly improving the air in the room. It is better to
ventilate fully for a short time (with completely open windows).
Turn off the thermostat when ventilating.
Hot water
Always set the hot water temperature to as low as possible.
A lower setting on the thermostat means a higher rate of energy savings.
Furthermore, higher hot water temperatures result in increased limescale deposits
and thereby impair the function of the appliance (e.g. longer heating-up times or
lower output).
Circulation pump
If there is a circulation pump for hot water, use a timer programme to control its
operation according to the specific requirements (e.g. morning, afternoon,
evening).
To Next Page
Loading...
