Transporting the boiler
13
Condens 7000 F – 6720871560 (2019/11)
4 Transporting the boiler
DANGER:
Risk to life through falling loads!
Falling loads can result in life-threatening injuries.
Only transport the boiler by means of a crane, forklift truck pallet
truck or transport rollers.
Only trained authorised personnel may undertake the handling
(e.g. by forklift truck) or lifting by means of a crane/hoist.
Observe safety instructions relating to the lifting of heavy loads
(e.g. by means of a crane/hoist).
Wear personal safety equipment (e.g. safety boots and protective
gloves).
Protect the boiler against slippage by means of a transport strap.
CAUTION:
Risk of injury through carrying heavy loads!
Only transport the boiler by means of a crane/hoist, forklift truck or
transport rollers.
NOTICE:
Boiler damage through impact!
The standard delivery of the boiler includes components that are
susceptible to impact damage.
During handling protect all components against impact.
Observe the transport markings on the packaging.
The boiler may be transported to the place of installation by crane/hoist,
forklift truck or pallet truck. Where possible, transport the boiler to the
installation location in its shipping packaging to protect it from
contamination.
4.1 Transporting the boiler by crane/hoist
NOTICE:
Boiler damage through means of transport!
Without the cardboard side strips, the boiler frame will deform through
lifting it by crane/hoist.
When transporting the boiler do not remove the strips.
Pass the lifting gear (round slings) through the boiler frame
(Fig. 5).
Fig. 5 Guide of crane lifting gear on the frame
Fig. 6 Transporting the boiler with crane (viewed from front left)
To Next Page
Loading...
