CC8313 control unit
15
Condens 7000 F – 6720871579 (2022/10)
5.7.1 Calling up menu levels or functions
To call up individual menu levels or select functions:
▶ Tap the corresponding position on the display with your finger.
Fig. 14 Call up menu level or function
[1] Heat production
[2] Status display
[3] System (Heat distribution)
[4] Fault history
The next menu level or function is displayed.
Menu levels
If several menus or functions exist at one level:
▶ Tap the corresponding position (function) on the display with your
finger.
Fig. 15 Heating circuit overview (example)
[1] Control unit 00 > System
[2] Domestic hot water
[3] Heating circuit 03
[4] Heating circuit 01
[5] Heating circuit 04
[6] Heating circuit 02
[7] Heating circuit 05
[8] Heating circuit 07
[9] Heating circuit 06
Scroll, swipe
To select a different function within a menu level:
▶ Tap the right or left arrow on the display with your finger.
Fig. 16 Scrolling
-or-
▶ Swipe to the left or right across the display with your finger.
Fig. 17 Swipe
Display of heating circuits
The designation assigned to the heating circuits depends on the slot of
the heating circuit module. The heating circuits are numbered according
to the sequence of slots (from the left to the right). This means that the
heating circuits at slot 1 appear in the display as heating circuit 01 and
02. The heating circuits at slot 2 are displayed as 03 and 04. If a different
module is inserted at a slot, these heating circuits numbers are omitted.
If a name has been assigned to the heating circuit, this is displayed.
5.7.2 Calling up submenus
Observe technical documentation of the installed control unit.
0010006521-002
12:00
21
4
3
0010006525-003
12:00
1 2 3 4
89
5 6 7
0010006536-003
12:00
50 °C
on/off
30 %
0010006537-003
12:00
50 °C
on/off
30 %
To Next Page
Loading...
