Bosch Condens 7000 WP - Page 51

Technical information and reports
51
Condens 7000 WP – 6721842519 (2022/03)
Table 31 Commissioning report
Changed service functions
Read off the changed service functions and enter the values here.
 Label with “settings in the service menu” filled out and affixed.
Heating controls:
 Weather-compensated control  Room temperature-dependent control
 Remote control × ...... pce., heating circuit(s) coding:
 Room temperature-dependent control × ...... pce., heating circuit(s) coding:
 Module × ...... pce., heating circuit(s) coding:
Miscellaneous:
 Heating controls set, Notes:
 Changed settings for the heating controls documented in the operating/installation instructions for the control unit
The following work has been carried out:
 Electrical connections checked, Notes:
 Condensate trap filled  Carry out a combustion air/flue gas test
 Function check carried out  Leak test carried out on the gas and water sides
Commissioning includes checking the setting values, a visual leak test on the appliance and a function check of both the device and its control. The
system installer conducts a test of the heating system.
The system named above has been checked to the extent described.
___________________________________________________________
Name of service engineer
The documents have been handed over to the user. The user has been
made aware of the safety instructions and operation of the above-
mentioned wall mounted boiler, including accessories. Attention has been
drawn to the requirement for regular maintenance of the above-mentioned
heating system.
__________________________________________________________
Date, user's signature
____________________________________________________________
Date, system installer's signature
Affix the test report here.