Bosch Condens 8300i W - Page 17

Installation
17
Condens 8300i W – 6721841531 (2022/10)
▶ Remove the packaging, observing all notices in the packaging.
Fig. 17 Packaging instructions
▶ Make sure that the gas type specified on the data plate is the same as
the gas type supplied.
▶ Make sure that the installation location is in the country of destination
specified on the data plate.
▶ Affix an installation template (if available) to the wall.
▶ Check whether the screws and rawl plugs supplied with the device
can be used.
▶ Drill suitable holes for the selected rawl plugs and screws.
▶ Fasten the mounting rail to the wall using the available screws and
wall plugs (scope of delivery).
▶ Fitting the mounting plate.
0010023489-002
1.
2.
1.
2.
2.
7
6a 6
5a
5
43
2
1