Product Information
Condens 8300i W – 6721841531 (2022/10)
6
2.4 Product identification
Data plate
The data plate contains performance data, approval data and the serial
number of the product.
The position of the data plate can be found in the product overview in this
chapter.
Additional type plate
The additional type plate contains information on the product name and
the most important product data.
It is located in an easily accessible place on the outside of the product.
2.5 Overview of types
Combi boilers for central DHW heating (domestic hot water)
according to the instantaneous water heating principle
Table 1 Overview of types
2.6 Dimensions and minimum clearances
Fig. 2 Side view (mm)
[1] Flue accessories, horizontal
[2] Fascia
[3] Flue accessories, vertical
A Clearance between top edge of device and centre axis of
horizontal flue
B Clearance between top edge of device and ceiling
K Hole diameter
S Wall thickness
* With mounting rail
Table 2 Wall thickness S depending on the diameter of the flue
accessories
Type Country Part no.
GC8300iW 35/40 C AU/NZ 7738101047
Wall thickness S K [mm] for Ø flue accessories [mm]
Ø 60/100 Ø80 Ø 80/125
15–24 cm 130 110 155
24–33 cm 135 115 160
33–42 cm 140 120 165
42–50 cm 145 125 170
365
780
88*
S
0010032013-003
17
2
1
3
≥100
(52 mm/1 m)
A
B
5,2 %
K
To Next Page
Loading...
