Bosch CRC200 - 11 Setup Log (Service Menu;Contractor)

6 720 821 651 (2017/05)CRC200
Setup log (Service menu/contractor) | 29
11 Setup log (Service menu/contractor)
__ _
Table 14 Enter the ID number on the backside of the user interface here. Removal from wall plate has to be done to look at the ID.
Customer/system user Installer
........................................................................................
........................................................................................
Date commissioned:
Menu item Selection
System data (for details see Table. 5, Page. 17)
HC assignment  1  2  3  4  5  6  7  8
Pump conn.  Heat Source  HC Module (CZM100)
Heat. System  High Temp  Low Temp.
Control type  External simple  External opt.  Room supply  Room output
DHW  No  Yes, 3-wy vlv  Yes, pr. pump
LLH Sensor  No  Yes, on mod.
Recirculation  NO  YES
WWSD  OFF | °F ( °C)
Min.outs.temp °F( °C)
Damping  OFF  ON
Building Type  Tight  Medium  Loose
Table 15 Setup log