Bosch D7212GV3 - Figure 5: Example Opening Window Timeline; Table 26: Programming for Two same Day Opening Windows (Refer to Figure 5); Table 27: Programming to Link Two Days over Midnight

D7212GV3 | Program Entry Guide | 5.0 Schedules (Skeds) EN | 97
Bosch Security Systems, Inc. | 10/11 | F01U170808-02
Figure 5: Example Opening Window Timeline (using two Opening Windows on same day)
1
2
3
4
5
6
7
8
9
1 - Areas disarmed between midnight and 6 AM
generate Opening Reports.
2 - Areas disarmed between 6 AM and 7 AM
generate Early to Open Reports.
3 - If the area is disarmed between 7 AM and 8 AM
regular Opening Reports are generated. If
Disable O/C in Window is programmed Yes the
Opening Report is not sent to the central station.
4 - If the area is not disarmed by 8:01 AM, a Fail to
Open Event is generated if Fail to Open is
programmed Yes in Opening and Closing
Options.
5 - If the user disarms the area between 8:01 AM
and 12:59, PM a Late to Open Event is
generated.
6 - Areas that are disarmed between 1 PM and 2
PM generate Early to Open Reports.
7 - If the area is disarmed between 2 PM and 3
PM regular Opening Reports are generated. If
Disable O/C in Window is programmed Yes,
the Opening Report is not transmitted to the
central station.
8 - If the area is not disarmed by 3:01 PM, a Fail to
Open Event is generated if Fail to Open is
programmed Yes in Opening and Closing
Options.
9 - If the user disarms the area between 3:01 PM
and 11:59 PM, a Late to Open Event is
generated.
Table 26: Programming for Two Same Day Opening Windows (refer to Figure 5)
Open Close
W# Day of Week
Early
Begin
Start Stop
Early
Begin Start Stop
eXcept On
Holiday
Holiday
Index
Area(s)
1 S M T W T F S 06: 00 07 : 00 08: 00 Yes / No 1 2 3 4 1 2 3 4 5 6 7 8
2 S M T W T F S 13 : 00 14 : 00 15 : 00 Yes / No 1 2 3 4 1 2 3 4 5 6 7 8
Do not program a single window to cross the midnight boundary. The window stop time must be later than the
window start time. To program a window that effectively crosses the midnight boundary, you must program two
windows.
For example, to program windows for an area that opens between 11:30 PM and 12:30 AM, five days a week,
use two windows as shown in Table 27.
Table 27: Programming to Link Two Days over Midnight
*
Open Close
W# Day of Week
Early
Begin
Start Stop
Early
Begin Start Stop
eXcept On
Holiday
Holiday
Index
Area(s)
1 S M T W T F S 22: 00 23 : 30 23: 59 Yes / No 1 2 3 4 1 2 3 4 5 6 7 8
2 S M T W T F S 00 : 00 00 : 00 00 : 30 Yes / No 1 2 3 4 1 2 3 4 5 6 7 8
 The setting for midnight is 00:00.