D7212GV3 | Operation and Installation Guide | 9.0 Off-Board Points
40 Bosch Security Systems, Inc. | 10/10 | F01U143079-03
Figure 16: Connecting D8128D OctoPOPITs to the D7212GV3
1 - Zonex 1 address 2 - Sensor loops
Refer to Address Switches in Section 9.4.4 Setting the OctoPOPIT Switches on page 38 for
information about making these switch settings. Refer to Table 14 on page 39 for information about
setting Switch 5.
Do not loop wiring around any terminal.
To Next Page
Loading...
