Bosch D7412GV2 - Page 132

D9412GV2/D7412GV2 | Troubleshooting Guide | 4.0 Appendix
132 Bosch Security Systems, Inc. | 11/05 | F01U011024B
D9133
Table 66: D9133 Specifications
Operating Voltage 8.5 V to 14 VDC
Current Draw 39 mA (min), 45 mA (max)
Dimensions (Enclosure) 14 cm x 8.3 cm x 4.5 cm (5.5 in. x 3.25 in. x 1.75 in.)
D9133DC
Table 67: D9133DC Specifications
Dimensions (Enclosure)
H x W x D
14 cm x 8.3 cm x 4.5 cm (5.5 in. x 3.25 in. x 1.75 in.)
Current Draw 50 mA (55 mA with diagnostic LEDs enabled)
DX4010i
Table 68: DX4010i Specifications
Operating Voltage 12 VDC
Current Draw 50 mA nominal, 55 mA with
diagnostic LEDs enabled
Communication
Configuration
Programmable through the control
panel. Refer to the appropriate
control panel programming
instructions.
Operating
Temperature
0°C to +50°C (+32°F to +122°F)
Relative Humidity 5 to 85% @ +30°C (+86°F) non-
condensing
Control Panel
Compatibility
Detection Systems Option Bus
DS7240, DS7220 and DS7400Xi;
Bosch Security Systems D6412,
D4412 or Bosch Security Systems
SDI Bus D9412GV2, D7412GV2,
D7212GV2, D9412G, D7412G,
D7212G, D9412, D9124, D9112,
D7412 and D7212.
DX4020
Table 69: DX4020 Specifications
Dimensions 7.6 cm x 12.7 cm (3 in. x 5 in.)
Current Draw 84 mA maximum, 80 mA nominal
10 Base-T
110 mA maximum, 100 mA nominal
100 Base-T
Operation
Voltage
12 VDC Nominal
Control
Panel
SDI Bus Terminal block Connectors
LAN/WAN RJ-45 Modular Jack
(Ethernet)
Category 3 or better unshielded twisted pair Ethernet
Cable
Max Length 100 m (328 ft)
Interface IEEE 802.3
Compatibility Bosch Control Panels
- Version 6.3 or later
Default IP
Address
0.0.0.0 (DHCP mode)