Bosch D7412GV4 - View Point Status

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09 145
18.4 [4] Srvc Byp Menu
In this menu, you can edit the Service Bypass points.
Service Bypass
B91x/B92x keypads Configuration of Service Bypass
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [4] Srvc Byp menu option.
3. Enter the desired point number followed by [ENTER]. The curser flashes at the editing location.
4. Press [ENTER] again to save the programming.
5. When the keypad shows Parameter Saved, escape from the menu.
B93x/B94x keypads Configuration of Service Bypass
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [4] Srvc Byp menu option.
3. Enter the desired point number followed by pressing the Enter softkey.
4. Press the Bypass softkey to bypass the desired point number.
5. When the keypad shows Parameter Saved, escape from the menu.