32 en | Panel and Area Wide Parameters D9412GV4/D7412GV4/D7212GV4
F.01U.218.312 | 04 | 2012.03 Program Entry Guide Bosch Security Systems, Inc.
R# Backup Device
Select the communication device and the backup destination. The backup device is used
when the primary device fails to reach the programmed destination.
Refer to Section 3.4 Programming Path Numbers and Network Addresses for Enhanced
Communications, page 40 to enable enhanced communication paths.
Default: No Device
Selection: No Device, Phone 1..4, SDI ## Path 1..4
Phone 1 Phone 1 is this group’s backup destination if the primary destination
fails.
Phone 2 Phone 2 is this group’s backup destination if the primary destination
fails.
Phone 3 Phone 3 is this group’s backup destination if the primary destination
fails.
Phone 4 Phone 4 is this group’s backup destination if the primary destination
fails.
SDI 88 Path 1 Path 1 on SDI 88 is this group's backup destination if the primary
destination fails.
SDI 88 Path 2 Path 2 on SDI 88 is this group's backup destination if the primary
destination fails.
SDI 88 Path 3 Path 3 on SDI 88 is this group's backup destination if the primary
destination fails.
SDI 88 Path 4 Path 4 on SDI 88 is this group's backup destination if the primary
destination fails.
SDI 92 Path 1 Path 1 on SDI 92 is this group's backup destination if the primary
destination fails.
SDI 92 Path 2 Path 2 on SDI 92 is this group's backup destination if the primary
destination fails.
SDI 92 Path 3 Path 3 on SDI 92 is this group's backup destination if the primary
destination fails.
SDI 92 Path 4 Path 4 on SDI 92 is this group's backup destination if the primary
destination fails.
SDI2-1 Path 1 Path 1 on SDI2-1 is this group's backup destination if the primary
destination fails.
SDI2-1 Path 2 Path 2 on SDI2-1is this group's backup destination if the primary
destination fails.
SDI2-1 Path 3 Path 3 on SDI2-1 is this group's backup destination if the primary
destination fails.
SDI2-1 Path 4 Path 4 on SDI2-1 is this group's backup destination if the primary
destination fails.
SDI2-2 Path 1 Path 1 on SDI2-2 is this group's backup destination if the primary
destination fails.
SDI2-2 Path 2 Path 2 on SDI2-2 is this group's backup destination if the primary
destination fails.
SDI2-2 Path 3 Path 3 on SDI2-2 is this group's backup destination if the primary
destination fails.
SDI2-2 Path 4 Path 4 on SDI2-2 is this group's backup destination if the primary
destination fails.
NOTICE!
To meet UL 864 requirements for Central Station and Remote Station applications (D9412GV4
and D7412GV4), program a Backup Device.
To Next Page
Loading...
