Bosch D7412GV4 - Delete User

98 en | Panel and Area Wide Parameters D9412GV4/D7412GV4/D7212GV4
F.01U.218.312 | 04 | 2012.03 Program Entry Guide Bosch Security Systems, Inc.
Add User
Use this function to add or change passcodes, add or change tokens or cards and Sub-users,
and add or change control panel authority levels (L##) by area.
Del User
Use this function to delete a user’s passcode and tokens or cards. It does not delete user
names.
Extend Close
Use this function to change the expected closing time for the area. The window cannot be
adjusted until the Close Early Begin time passes and the Closing Window is active.
View Log
Use this function to view all of the system events, their time stamps, User IDs, or point
numbers. User Name and Point Text are not stored in the event log, but they appear when the
control panel matches them with the User ID ### and the Point ###.
Each event appears on one line in the log. Any information related to that event appears on a
separate line in the log.
Print Log
Use this function to print all the events stored in the control panel beginning at the start date
and ending with the last event in the log.
Default: P
Selection: -, E, or P
Function No. Function Name Alternate Keystroke
18 Add User [COMMAND][5][6]
Default: P
Selection: -, E, or P
Function No. Function Name Alternate Keystroke
18 Delete User [COMMAND][5][3]
NOTICE!
This function deletes the passcode, master user, and all sub-users associated with the user
number.
Default: P
Selection: -, E, or P
Function No. Function Name Alternate Keystroke
20 Extend Close [COMMAND][5][1]
Default: E
Selection: -, E, or P
Function No. Function Name Alternate Keystroke
21 View Log (Menu function only)
Default: P
Selection: -, E, or P
Function No. Function Name Alternate Keystroke
22 Print Event Log (Menu function only)