Bosch D7412GV4 - Status Indicators Overview

44 pages

To Previous Page

Bosch Security Systems, Inc.

130 Perinton Parkway

Fairport, NY 14450

USA

www.boschsecurity.com

Main Page

Table of Contents3
Introduction5
About Documentation5
Determine Bosch Security Systems, Inc. Product Manufacturing Dates5
D9412GV4/D7412GV4 Control Panel Connections6
Upgrade D9412GV4/D7412GV4 Hardware and Programming8
Receive Existing Control Panel Programming8
Receive Existing Control Panel Programming with RPS8
Upgrade Previous GV Series Hardware to a D9412GV4/D7412GV4 V1.00 Control Panel8
Prepare to Remove Existing Hardware8
Remove the Existing Control Panel9
Install the D9412GV4/D7412GV4 V2.00 Control Panel in the Enclosure9
Replace the Terminal Strips10
Upgrade Programming to a D9412GV4/D7412GV4 V2.00 Control Panel10
Upgrade a GV4 (Version 1.00 - 1.99), GV3 Series, GV2 Series, G Series, or Non-G Series11
Programming the Control Panel13
RPS Programming over a Network Using the DX4020 Ethernet Network Interface Module13
RPS Programming over a Network Using the ITS-DX4020-GGPRS/GSM Communicator13
RPS Programming Using the DX4010V2 RS-232/USB Serial Interface Module13
RPS Programming Using the B420 Conettix Ethernet Communication Module13
RPS Programming Using the B426 Conettix Ethernet Communication Module13
Programming Using the Installer Menu13
Programming to Set up Central Station Reporting14
Basic Telephone Set up in RPS14
Basic Internet Protocol (IP)14
Account Number15
Programming the Control Panel for Common Reporting Options16
Set up Daily Test Report Using RPS16
Set up Open and Close Reports Using RPS16
Area Wide Parameters16
Set Authority Level16
Setting up Points and Outputs17
Using the Relay Option Within Point Assignments17
Point Index (Default Values)18
Add System Users Locally with a Keypad20
Adding a User20
Configuring the User's Passcode20
Configuring the User's Name20
Configuring the User's Level20
Configuring a RADION Keyfob or an Inovonics Transmitter for the User20
Adding a Card for the User21
Keypad Commands22
Legacy Keypads: D1255, D1260, D126522
Turning the System on or off and Keypad Commands for B920/B93022
Turning the System on and off22
Turning All on (Arming)22
Turning off (Disarming)22
Set Duress +1 Using RPS22
SIA CP-01 False Alarm Prevention Options23
Device Address Settings24
B930 ATM Style Alphanumeric Keypad24
B920 Two-Line Alphanumeric Keypad24
B208 Octo-Input Module Rotary Address Switch Settings24
B308 Octo-Output Module Rotary Address Switch Settings24
B810 Receiver24
B820 Inovonics Interface Module Rotary Address Switch Settings24
B426 Conettix Ethernet Communication Module Rotary Address Switch Settings24
B420 Conettix Ethernet Communication Module Rotary Address Switch Settings24
B520 Auxiliary Power Supply Module Rotary Address Switch Settings24
D9210C Access Control Interface Module Rotary Address Switch Settings25
D1255, D1260, D1265 Dip Switch Settings25
D8129 Octorelay Dip Switch Settings25
D8128D Octopopit Dip Switch Settings25
Reporting and Device Number Information26
Reporting Format Definitions26
SDI/SDI2 Address Information35
Device Numbers (Zzz, DDDD)36
Communication Trouble Device Numbers (Zzzz)36
Special User Ids (Uuuu, IIII)37
Keypad Alarm Virtual Point Numbers (Ppp, Pppp)37
Frequently Asked Questions39

Bosch D7412GV4 - Status Indicators Overview

Table of Contents

Other manuals for Bosch D7412GV4

Related product manuals