Bypass menu
Use the Bypass menu to temporarily take points out of
the security system, and enter them back into the
system. Bypassed points do not create alarm or trouble
events, do not detect intruders, and cannot send any
reports. For example, to leave a window open and turn
the system on, you bypass the window point and then
turn the system on.
Bypass
You can bypass
points when an area is turned off
(disarmed). Points remain bypassed until you unbypass
them or some points return when the area is turned off
(disarmed). Use point bypassing with discretion:
bypassing a point reduces the level of security.
Bypassing a point:
1. Open the Main menu.
2. Press [1] or [ENTER] to open the On/Off menu.
3. Use [NEXT] to go to the Bypass menu, and press
[ENTER], or simply press [5].
4. Press [1] or [ENTER] to open the Bypass Points
menu.
5. Select a point to bypass.
6. Press [ESC] to exit the menu.
24.5
24.5.1
142 en | B92x/B91x On/Off menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.
To Next Page
Loading...
