Lock Door
Use the Lock Door menu to lock an unlocked door. Also
use this menu to lock doors that were automatically
opened during a fire alarm. Once a door is locked, a
user must present a card to enter, or send an Unlock or
a Cycle command from the keypad to allow the door to
open.
Locking a door:
1.
Open the Main menu.
2. Use [NEXT] to go to the Actions menu option, and
press [ENTER] , or simply press [3].
3. Use the [NEXT] key to go to the Access menu
option, and press [ENTER], or simply press [8].
4. Use [NEXT] to go to the Lock menu option, and
press [ENTER], or simply press [3].
5. Enter your passcode and press [ENTER].
6. Enter the number of the door you wish to lock, then
press [ENTER]. The door locks and the display
changes to show the door’s number (1 – 8).
7. Press [ESC] to exit the menu.
26.8.3
166 en | B92x/B91x Actions menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.
To Next Page
Loading...
