Bosch D7412GV4 - Page 175

11. To remove the added keyfob or transmitter, use
[NEXT] to go to the Remove a Keyfob option, and
press
[ENTER] or simply press [4].
12. Press [ESC] to exit the menu.
This feature is:
available on my system.
unavailable on my system.
Configuring a card to a user:
1.
Use [NEXT] to go to the Configure Card option, and
press [ENTER], or simply press [5].
2. Press [ENTER] to continue. The keypad shows
Present card.
3. Present the card at the reader.
4. If the reader identifies the card, the keypad shows
Card configured.
5. Press [ESC] to exit the menu.
This feature is:
available on my system.
unavailable on my system.
Control Panels B92x/B91x Users menu | en 175
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176