Edit User
Use the Edit User function to edit a user of your security
system. You need to know the user number for the user
you want to edit.
Editing an existing user:
1.
Open the Main menu.
2. Use [NEXT] to go the Users menu option, and press
[ENTER], or simply press [4].
3. Use [NEXT] to go to the Edit User menu option, and
press [ENTER], or simply press [3].
4. Enter your passcode and press [ENTER].
5. Enter the number (1 – 50) for the user you wish to
edit, and press [ENTER].
6. The keypad shows the name for the user number
you entered. Press [ENTER].
Configuring the user’s passcode:
1. Press [1] or [ENTER] to open the Configure
Passcode menu.
2. Press [ENTER] to configure the user’s passcode.
3. Enter the user’s passcode and press [ENTER].
4. Enter the passcode again and press [ENTER]. The
keypad shows Passcode changed and then returns to
the previous menu.
Configuring the user’s name:
27.3
176 en | B92x/B91x Users menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.
To Next Page
Loading...
