Turning off with Early Ambush enabled:
1.
Enter the first passcode and press [ENTER]. The
keypad shows the system is turned off. Early
ambush time begins counting down. The keypad
does not indicate that early ambush time is counting
down.
2. You must enter the second passcode before the
Early Ambush time expires. Warning! Failure to
cancel will result in alarm transmission and law
enforcement may be dispatched.
3. Enter a second passcode and press [ENTER]. The
keypad shows Code 2 Validated to confirm that the
security system accepted the second passcode and
stopped the Early Ambush time countdown. The
system does not create a duress event.
Control Panels Options | en 197
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
