Command Function
[CMD] 0 Bypass
[CMD] 0 0 Unbypass
[CMD] 1 All on (with delay)
[CMD] 1 1 All On, Instant
[CMD] 2 Part On, Instant
[CMD] 3 Part On (with delay)
[CMD] 4 0 See Alarms
[CMD] 4 7 Reset Sensors
[CMD] 5 0 Go to Area
[CMD] 5 1 Extend Close
[CMD] 5 3 Delete User
[CMD] 5 5 Change Passcode
[CMD] 5 6 Add User
[CMD] 5 9 Show Revision
[CMD] 6 Watch Mode
[CMD] 8 Open Main menu
Control Panels B94x/B93x menu tree and commands | en 49
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
