Bosch D7412GV4 - RPS

RPS
Use the RPS menu for connection to
Remote
Programming Software (RPS). Your security company
uses RPS to configure and service your security system.
RPS is intended for use by professional or licensed
installers only.
Answer
Use the Answer option to answer the phone (pick up
the phone line) to connect to
RPS.
Using the Answer menu option to answer an incoming
call from RPS:
1. Open the Main menu.
2. Press [Actions] to open the menu.
3. Press [RPS] to open the menu.
4. Press [Answer] to open the menu.
5. Enter your passcode and press [ENTER].
The keypad shows RPS is connecting…. and then returns
to idle text.
16.4
16.4.1
74 en | B94x/B93x Actions menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.