Bosch D7412GV4 - Page 90

Adding a user:
1.
Open the Main menu.
2. Press [Users].
3. Press [Add User] to open the menu.
4. Enter your passcode and press [ENTER].
5. Enter the number (1 – 50) for the user you wish to
add, and press [ENTER].
Configuring the user’s passcode:
1. Press [Passcode] to set the passcode.
2. Press [ENTER] to continue.
3. Enter the user’s passcode and press [ENTER].
4. Enter the passcode again and press [ENTER]. The
keypad shows Passcode changed and then returns to
the previous menu.
Configuring the user’s name:
1. Press [Name] to configure the user’s name.
2. The B94x offers a qwerty keyboard. For a B93x,
press a number key repeatedly to scroll through the
number and letters shown on the key. To enter a
space, press [0][0]. To capitalize a letter, press
[CMD] before you enter the letter. For caps lock,
press [CMD][CMD]. To remove caps lock, press
[CMD][CMD][CMD].
3. Press [ENTER] to save the name. The keypad returns
to the previous menu.
90 en | B94x/B93x Users menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.