Configuring the user’s level:
1.
Press [Level] to assign an authority level.
2. Press [ENTER] to continue.
3. Press [Yes] to change the default authority level for
area 1.
4. Enter the authority level number (1 – 14) you wish
to apply to the user and press [ENTER]. The keypad
shows Level configured and returns to the previous
menu.
5. If your security system has more than one area, use
[NEXT] and the previous two steps to set the levels
for the additional areas.
Control Panels B94x/B93x Users menu | en 91
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
