Edit User
Use the Edit User function to edit a user of your security
system. You need to know the user number for the user
you want to edit.
Editing an existing user:
1.
Open the Main menu.
2. Press [Users] to open the menu.
3. Press [Edit User] to open the menu.
4. Enter your passcode and press [ENTER].
5. Enter the number (1 – 50) for the user you wish to
edit, and press [ENTER].
6. The keypad shows the name for the user number
you entered. Press [Continue].
Configuring the user’s passcode:
1. Press [Passcode] to set the passcode.
2. Press [ENTER] to continue.
3. Enter the user’s passcode and press [ENTER].
4. Enter the passcode again and press [ENTER]. The
keypad shows Passcode changed and then returns to
the previous menu.
17.3
94 en | B94x/B93x Users menu Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.
To Next Page
Loading...
