D9412GV2/D7412GV2 | Troubleshooting Guide | 4.0 Appendix
128 Bosch Security Systems, Inc. | 11/05 | F01U011024B
Table 58: POPIT Specifications (continued)
Dimensions (H x W x D) D8125 module: 19 mm x 73 mm x 12.7 cm (0.75 in. x 2.9 in. x 5.0 in.)
D8126 enclosure: 24 mm x 73 mm x 11.1 cm (0.9 in. x 2.9 in. x 4.4 in.)
D8127/D9127
enclosure:
24 mm x 38 mm x 81 mm (0.9 in. x 1.5 in. x 3.2 in.)
UL Applications The control panel enclosure and POPIT modules required for specific UL or NFPA Zonex system
applications are listed below. The D8108A Attack-Resistant Enclosure meets or surpasses the
requirements for all of these applications. Any mercantile combination fire and burglar system must
use the model D8126T/D8127T POPIT Module. Refer to UL 681 “Installation and Classification of
Mercantile and Bank Burglar Alarm Systems” for more details on installation requirements.
Application Control D8126/D8127 Enclosure Model
Residential
UL Household Fire/NFPA 74 D8103 U or T
UL Household Burglar D8103 U or T
Commercial
UL Local Burglar/Police Connected Burglar D8108A T*
UL Central Station Burglar Grade C D8103 T*
UL Central Station Burglar Grades B & A D8108A T*
UL Local Fire/NFPA 72 D8109 U or T
UL Central Station Fire/NFPA 71 D8109 U or T
UL Remote Station Fire/NFPA 72 D8109 U or T
UL Electrically Activated Transmitter D8109 U or T
* A model “U” POPIT mounted within a tampered enclosure can be used in
place of a model “T” POPIT.
The following describe the classification of the Bosch Security Systems modules. Please refer to
the 1996 NFPA 72 pages 33 to 36 for the specific details of IDC, SLC, NAC conditions.
Module Class Style 1996 NFPA Table
D125B (Powered Loop Interface) B A 3-5
D129 (Dual Class A Initiation Module) A D 3-5
D192C (Bell Supervision Module) B W 3-7.1
D8125 (Zone Expansion Module) B 3.5 3-6
D9127 (Point of Protection Module) B A 3-5
Information provided by the UL test report and the 1996 NFPA Code book.
To Next Page
Loading...
