Bosch D9412GV4 - Page 143

D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 18.0 Installer Menu
.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09 143
B93x/B94x keypads use of Settings
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [3] Diags > [2] Network > [1] Bus Module (1) or [2]Bus Module (2) > [1]
Settings menu option. The keypad scrolls through the following sub-categories, indicating the
programming for:
 Hostname
 IPv4 Source IP
 IPv6 Source IP (for B426 only)
 Mac Address
3. When you finish viewing the information, escape from the menu.
Connection
B91x/B92x keypads use of Connection
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [3] Diags > [2] Network > [1] Bus Module (1) or [2]Bus Module (2) > [2]
Connection menu option. The keypad scrolls through the following sub-categories, indicating
the programming for:
 Link
 IP Address
 DNS
 WAN IPv4
 WAN IPv6 (for B426 only)
 LAN IPv4
 LAN IPv6 (for B426 only)
3. When you finish viewing the information, escape from the menu.
B93x/B94x keypads use of Connection
1. Enter the installer passcode, and then open the [1] Installer menu.
2. Go to the [3] Diags > [2] Network > [1] Bus Module (1) or [2]Bus Module (2) > [2]
Connection menu option. The keypad scrolls through the following sub-categories, indicating
the programming for:
 Link
 IP Address
 DNS
 WAN IPv4
 WAN IPv6 (for B426 only)
 LAN IPv4
 LAN IPv6 (for B426 only)
3. When you finish viewing the information, escape from the menu.