D9412GV4/D7412GV4 v2.03 | Installation and System Reference Guide | 6.0 Power Outputs
.
Bosch Security Systems, Inc. | 7/16 | F01U265457-09 36
Verification and Reset Output
The default program sets Output C (Terminal 8)
as a verification and reset output. Refer to Output
Parameters and Point Assignments in the Control
Panels (D9412GV4/D7412GV4 v2.03) Program
Entry Guide (P/N: F01U265459) for instructions
on programming verification and reset outputs
and points.
Performing a sensor reset at a keypad produces a
five-sec output activation of verification and reset
outputs. The control panel ignores verification
and resettable points during the five sec.
To Next Page
Loading...
