Bosch D9412GV4 - Cleared events are not lost; View faulted or bypassed points

12 en | Introduction D9412GV4/D7412GV4/D7212GV4
F.01U.218.312 | 04 | 2012.03 Program Entry Guide Bosch Security Systems, Inc.
2.5.1 Keypad Programming Menu
D1255 Keypad Programming Menu
99 [ENT] [NEXT] or [PREV] TOOLS MENU [ENT] ENTER PASSCODE (Installer) [ENT]
PROGRAMMING
Refer to
Page
NOTICE!
To move
through the
PROGRAMMING
menu and
submenus, press
[NEXT] or [PREV].
To open a
menu or submenu,
press [ENT].
To exit to the
previous level, press
[ESC].
To send saved
changes to the
control panel,
exit from
PROGRAMMING
mode.
PHONE NUMBERS [ENT]
PHONE 1 - 4 ........................................................... 17
PHONE PARAMETERS [ENT]
PHONE 1 - 4 ........................................................... 19
ENHANCED COMM [ENT]
40
COMMUNICATIONS ...........................................
40
PATH 1 - 4 ..........................................................
40
IP MODULE CONFIG [ENT]
B420 MODULE (1-2)
MODULE PARAM
DHCP ENABLE
180
UPnP ENABLE
184
ADDRESS PARAM
IP ADDRESS ..
180
SUBNET
MASK ................
181
DEFAULT
GATEWAY ..........
182
PORT
NUMBER ...........
184
DNS PARAM
SERVER
ADDRESS ..........
183
MODULE
HOSTNAME .......
186
ENCRYPTION
AES KEY SIZE
185
AES KEY .........
185
ROUTING [ENT]
ROUTING GRP 1 - 4 ............................................... 30
RPS PARAMETERS [ENT]
RPS PASSCODE ................................................
55
RPS PHONE NUMBER .......................................
58
RPS IP ADDRESS ..............................................
41
RPS IP PORT .....................................................
48
AREA PARAMETERS [ENT]
AREA NUMBER 1-32 .............................................
(1 - 8 for D7412GV4)(1 - 4 for D7212GV4)
61
COMMAND CENTER [ENT]
CC NUM 1 - 16 ...................................................... 80 and
81
USER PASSCODE [ENT].............................................................................................
126
POINT PARAMETERS [ENT]
PT NUM 1-247 .......................................................
(1-75 for D7412GV4)(1-40 for D7212GV4)
146
DISABLE KP PROG [ENT]..........................................................................................
101