Bosch D9412GV4 - B94 x;B93 x menu tree and commands; B94 x;B93 x On;Off menu; All On menu

D9412GV4/D7412GV4/D7212GV4 Introduction | en 15
Bosch Security Systems, Inc. Program Entry Guide F.01U.218.312 | 04 | 2012.03
2.5.4 RF Repeaters Menu
2.5.5 RF Diagnostics Menu
D1255 RF Repeaters Menu
99 [ENT] [NEXT] or [PREV] TOOLS MENU [ENT] ENTER PASSCODE (Installer) [ENT]
RF REPEATERS [ENT]
Refer to Page
ADD REPEATER [ENT].............................................................................
191
REPLACE REPEATER [ENT].....................................................................
192
REMOVE REPEATER [ENT]......................................................................
192
NOTICE!
Press [NEXT] or [PREV] to move through the RF REPEATERS menu and submenus.
Press [ENT] to open a menu or submenu.
Press [ESC] to exit to the previous level.
D1260 RF Repeaters Menu
99 [ENTER] [Next] Tools Menu [ENTER] Enter Passcode (Installer) [ENTER]
RF Repeaters [ENTER]
Refer to Page
Add Repeater [ENTER]............................................................................
191
Replace Repeater [ENTER].....................................................................
192
Remove Repeater [ENTER]......................................................................
192
NOTICE!
Press Next softkey to move through the RF Repeaters menu and submenus.
Press [ENTER] to open a menu or submenu.
Press the Exit softkey to exit to the previous level.
D1255 RF Diagnostics Menu
99 [ENT] [NEXT] or [PREV] TOOLS MENU [ENT] ENTER PASSCODE (Installer) [ENT]
RF DIAGNOSTICS [ENT]
Refer to Page
RF POINTS [ENT]
STATES .......................
193
SIGNAL STRENGTH.....
193
RF REPEATER ........................................................................................
NOTICE!
Press [NEXT] or [PREV] to move through the RF DIAGNOSTICS menu and submenus.
Press [ENT] to open a menu or submenu.
Press [ESC] to exit to the previous level.
D1260 RF Diagnostics Menu
99 [ENTER] [Next] Tools Menu [ENTER] Enter Passcode (Installer) [ENTER]
RF Diagnostics [ENTER]
Refer to Page
RF Points [ENTER]
States ........................
193
Signal Strength...........
193
RF Repeater ..........................................................................................
NOTICE!
Press Next softkey to move through the RF Diagnostics menu and submenus.
Press [ENTER] to open a menu or submenu.
Press the Exit softkey to exit to the previous level.