Schedule (SKEDs)
A SKED is a function programmed to be performed
automatically at a scheduled time by your security
system. You can change the scheduled time for SKEDs,
disable a SKED to prevent it from automatically
happening, or restart a previously disabled SKED.
Contact your security company to determine what
SKEDs they programmed for your system.
Selecting a SKED to change:
1.
Open the Main menu.
2. Use [NEXT] to go to the Settings menu option, and
press [ENTER], or simply press [5].
3. Use [NEXT] to go to the Schedule menu option, and
[ENTER], or simply press [3].
4. Enter your passcode and press [ENTER].
5. Use [PREV] or [NEXT] to scroll through the list of
SKEDs. The keypad indicates whether a SKED is
enabled, disabled, or not yet programmed.
6. With the SKED you wish to enable showing, press
[ENTER].
7. Continue to Enabling a disabled SKED or Disabling a
enabled SKED.
28.3
Control Panels B92x/B91x Settings menu | en 185
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
