User and burglary trouble events
The security company can program a keypad to emit the
trouble tone (three tones followed by a pause
repeated), when a user or burglary trouble event occurs.
If the system is on, the display shows the number of
points with troubles and the name for each point.
Silence user and burglary trouble events
Press
[ENTER] to silence the trouble tone.
View user and burglary trouble events
After a user enters a passcode, the name of the point in
trouble continues to scroll through the display. Use
/
[NEXT] to scroll text manually. Events scroll from oldest
to newest.
System trouble events
Examples of system trouble displays include Service AC
Failure and Service Battery Low. These displays appear
on all keypads in the system. All system trouble displays
begin with SERV or Service. The Service text clears only
after the faulted condition is corrected.
Press
[ENTER] to silence the trouble tone.
8.3
8.3.1
8.3.2
8.4
Control Panels Trouble events | en 27
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176
To Next Page
Loading...
