Bosch DCU 220 - 8 BIOS-Einstellungen; Information; Main Menu; Advanced

1 689 975 264 2015-06-02| Robert Bosch GmbH
16 | DCU 220 | de
8. BIOS-Einstellungen
i Nachfolgend aufgeführt sind die BIOS-Einstellungen
ab Werk.
8.1 Information
Name Setting
Model No: DCU220
Serial No: REAxxxxxxx
Asset Tag --
Processor Info: Intel(R) Core(TM) i5-4200U CPU@
1.6GHz
Installed System
Memory:
4096 MB
SATA HDD1: LITEONIT LGT-256M6G-256 GB
SATA HDD2: Not Installed
BIOS Revision: R0.xx. 021519
EC ReVersion: R0.xx. 021519
LAN MAC Address: dynamic
Operating Time: 0 Hours (at initial setup)
8.2 Main Menu
Name Setting
System Date: [16:28:15]
System Time: [01/03/2011]
OS Select Win7
Legacy USB Sup
-
port:
[Enable]
PXE Boot Legacy
8.3 Advanced
Name Setting
Wake Up Capability:
Any-key Wake Up from S3 Off
USB Wake Up From S3: Off
AC Initiation: Off
SATA Mode: [AHCI]
Virtualization Technology Setup
Intel ® Virtualization Technology Off
Intel ® VT for Directed I/O(VT-d) Off
Graphic Setup 128MB
DVMT Pre-Allocated
Device Configuration On
Wireless LAN: On
WWAN: On
Bluetooth: On
System USB Port: On
Internal Microphone: On
Internal Speaker:
8.4 Security
Name Setting
Account’s Password Status
Supervisor Password Is: set
User Password Is: Cleared
Set Supervisor Password: Ia4kd
Set User Password: [Enter]
Password on Boot: OFF
HDD Security Status
HDD 0 Password: Cleared
Set HDD 0 User Password: [Enter]
TPM Setup Menu
TPM Support On
Current TPM State disabled and deactivated
Change TPM Status No Change