Bosch DIVAR IP 7000 2U - Table of Contents

Table of contents
1
Safety precautions 4
1.1 General safety precautions 4
1.2 Electrical safety precautions 5
1.3 ESD precautions 6
1.4 Operating precautions 6
1.5 Important notices 7
1.6 FCC and ICES compliance 7
2
System overview 8
3
System setup - hardware 10
3.1 Introduction 10
3.2 Unpacking the system 10
3.3 Preparing for setup 10
3.3.1 Choosing a setup location 10
3.3.2 Rack precautions 11
3.3.3 General system precautions 11
3.3.4 Rack mounting considerations 11
3.4 Rack mounting instructions 12
3.4.1 Separating the sections of the rack rails 12
3.4.2 Installing the inner rails 13
3.4.3 Installing the outer rails to the rack 14
3.4.4 Installing the chassis into the rack 14
3.4.5 Installing the chassis into a Telco rack 15
3.5 Turning on the system 15
4
System setup - first steps 16
4.1 Introduction 16
4.2 Setup instruction 16
4.3 Starting the application 16
4.4 Using Bosch VMS Config Wizard 17
4.5 Adding additional licenses 18
4.6 Using Bosch VMS Operator Client 18
5
Additional documentation and client software 20
DIVAR IP 7000 2U Table of Contents | en 3
Bosch Sicherheitssysteme GmbH Quick Installation Guide 2014.12 | V4 | DOC