Bosch DIVAR IP 7000 2U - Page 33

4. Select a camera and drag it to an image window. The image of the camera is displayed if
the camera is assigned correctly.
Note:
Cameras in the image window with a red dot in the camera’s icon are viewed live.
To verify recording functionality in the Operator Client
4 Cameras in the Logical Tree with a red dot in the camera’s icon are recording.
To verify playback functionality in the Operator Client
4 The time line moves if the a camera is viewed in playback mode.
To perform further functionalities refer to the Bosch VMS manual.
Performance overview live
4CIF
2.5 Mbit 5 Mbit 10 Mbit
Number of software
monitors
20 13 9
720p
2.5 Mbit 5 Mbit 10 Mbit
Number of software
monitors
14 11 6
1080p
2.5 Mbit 5 Mbit 10 Mbit
Number of software
monitors
8 6 5
References to the manual are described in Additional documentation and client software, page
52.
DIVAR IP 7000 2U
System setup - first steps | en 33
Bosch Sicherheitssysteme GmbH Installation Manual 2014.12 | V4 | DOC