4.3.4 Installing the chassis into the rack 28
4.3.5 Installing the chassis into a Telco rack 28
4.4 Turning on the system 29
5
System setup - first steps 30
5.1 Introduction 30
5.2 Setup instruction 30
5.3 Starting the application 30
5.4 Using Bosch VMS Config Wizard 31
5.5 Adding additional licenses 32
5.6 Using Bosch VMS Operator Client 32
6
Connecting to the internet 34
6.1 Protecting the system from unauthorized access 34
6.2 Setting up port forwarding 34
6.3 Choosing an appropriate client 34
6.3.1 Remote connection with Operator Client 34
6.3.2 Remote connection with Video Security App 34
6.4 Installing an Enterprise Management Server 35
7
Recovering the unit 36
7.1 System recovery options 36
7.2 RAID disaster recovery 36
7.2.1 Multiple disks failed – theory 38
7.2.2 Multiple disks failed – practice 42
7.2.3 Foreign configuration disk appears in the Windows GUI after booting 46
7.2.4 MegaCLI Commandline Utility 47
8
Additional documentation and client software 52
9
Appendices 53
9.1 Motherboard 53
9.1.1 Motherboard layout 53
9.1.2 Motherboard component overview 54
9.1.3 Motherboard features 56
9.1.4 Block diagram 58
9.2 Chipset overview 58
9.3 PC health monitoring 59
9.4 Power configuration settings 59
9.5 Power supply 60
9.6 Super I/O 60
9.7 iSCSI support 60
9.8 Overview of the Nuvoton BMC controller 61
4 en | Table of Contents DIVAR IP 7000 2U
2014.12 | V4 | DOC Installation Manual Bosch Sicherheitssysteme GmbH
To Next Page
Loading...
