Need help?Do you have a question about the Bosch DIVAR IP all?in?one 5000 Series and is the answer not in the manual?
General| Power Supply | 100-240 VAC, 50/60 Hz |
|---|---|
| Channels | Up to 32 |
| Compression | H.265, H.264 |
| Network Interfaces | Gigabit Ethernet |
| Audio | Two-way audio |
Covers general safety rules, handling precautions, and specific warnings for safe operation and maintenance.
Details essential electrical safety measures to prevent harm and damage to the system during operation and servicing.
Outlines measures to prevent Electrostatic Discharge (ESD) damage to sensitive electronic components.
Provides guidelines for safe system operation, including chassis cover, battery handling, and backplane safety.
Advises on measures to protect system data and prevent unauthorized access, including physical security and updates.
Illustrates the front and rear views of the DIVAR IP all-in-one 5000 unit with labeled components.
Details the function of the power and reset buttons on the system's control panel.
Explains the status indications provided by the Power, HDD, Network, and Information LEDs.
Step-by-step instructions for safely removing a hard drive carrier from its bay.
Procedure for installing a hard drive into its carrier, including screw placement.
Guide for inserting the prepared hard drive carrier back into the system's drive bay.
Lists the pre-configured default IP address, subnet mask, and administrator credentials for the system.
Outlines essential requirements and network considerations before proceeding with system setup.
Explains the three distinct operational modes: full system, pure recording, and iSCSI storage expansion.
Instructions for formatting new hard drives before they can be used for video recording.
Guides initial startup, language selection, password changes, and configuration for different operating modes.
Details the purpose and limitations of the Config Wizard for system configuration.
Guide on how to activate additional software licenses using the Configuration Client.
Instructions on using the Operator Client to verify live, recording, and playback functionalities.
Recommendations for implementing strong password policies to secure the system from external threats.
Steps to configure port forwarding on the router for internet access to the DIVAR IP system.
Outlines the available methods for establishing remote connections to the system.
Steps to establish a remote connection using the BVMS Operator Client.
Instructions for connecting remotely to the system using the Video Security App.
Explains how to use system tools for health monitoring and status checks.
Procedure to restore the system to its factory default image, with options for data retention.
Information regarding warranty, support contacts, and service procedures for the storage system.
To Next Page