Bosch DS7400Xi - 9 Understanding the Programming Charts

DS7400Xi ( 4+) Reference Guide Copyright © 2007 Bosch Security Systems, Inc. P/N: F01U035325-01 Page 33
9.0 Understanding the Programming Charts
The Programming Reference Guide makes use of three types of charts. Each is described below.
If the chart looks like this, a combination of features is available to be programmed for that particular address.
0
Select Options
1 2 3 4 5 6 7
Feature 1
Feature 2
Feature 3
Feature 4
Enter the Data Digit as a:
Identifies the options/features
available for this address
Enter one of these numbers
for the appropriate data digit
The dots represent which
options/features are included
with each selection
Example:
To select
Feature 2
only,
enter the data digit as a 1.
To select
Feature 2
and
Feature 4,
enter the data digit as a 5.
If the chart looks like this, only a single feature is available to be programmed for that particular address.
Disabled
Perimeter Instant
24-Hour
Entry/Exit Delay #1
Entry/Exit Delay #2
1
2
3
4
0
Enter one of these numbers
for the appropriate data digit
Represents the option/feature
available for this address.
Example:
To select
Disabled
,
enter the data digit as a 0.
To select Entry/Exit Delay #2,
enter the data digit as a 4.
Select Option DD
Some pages may also include a Default chart that looks like this:
Zone Function
1
2
3
0001
0002
0003
23
24
21
Address Default