DS7400Xi ( 4+) Reference Guide Copyright © 2007 Bosch Security Systems, Inc. P/N: F01U035325-01 Page 47
10.15 Force Arming and Ground Fault Detect Programming: Program Address (2732)
Force Arming programming defines how many zones may be Force Armed using an Arming sequence followed by the [Bypass] key.
With this entry, all violated zones (up the programmed limit) will automatically be Force Armed (bypassed). Ground Fault Detect
programming determines whether or not the control will detect a ground fault condition.
See Glossary (sections 6.9 and 6.10) for further details.
Note: This limit does not apply when arming with
a keyswitch programmed with force arm-
ing enabled.
To Next Page
Loading...
