Bosch DS7400Xi - Phone Number Programming: Program Addresses (3159, 3175, 3191); Phone Number 1 Programming: Program Address (3159); Phone Number 2 Programming: Program Address (3175); Phone Number 3 Programming: Program Address (3191)

Page 74 P/N: F01U035325-01 Copyright © 2007 Bosch Security Systems, Inc. DS7400Xi (4+) Reference Guide
10.42 Phone Number Programming: Program Addresses (3159, 3175, 3191)
10.42.1 Phone Number 1 Programming: Program Address (3159)
10.42.2 Phone Number 2 Programming: Program Address (3175)
10.42.3 Phone Number 3 Programming: Program Address (3191)
Notes:
To dial the “*” character, enter *1 (The “*” character is sent as “1” “1” when pulse dialing).
To dial the “#” character, enter *2 (The “#” character is only valid when tone dialing).
To input a three second delay, enter *3.
To wait for the dial tone, enter *4 in the first digit.
To disable a Phone Number, enter *5 in the first digit.
(*1 - *5 are Hex values. They will display as B - F at the keypads.)
Recommendation: The phone line that the control panel is connected to should not have a Call Waiting feature. If it must have call
waiting, program the code to disable call waiting and add a three second delay before the phone number. This will prevent incoming
calls from interrupting a communication. For example: call waiting can be disabled in many areas by dialing *70 before the phone
number for tone dial and 1170 for pulse dial.
123456789101112131415161718192
0
21 22 23 24 25 26 27 28 29 30 31 32
123456789101112131415161718192
0
21 22 23 24 25 26 27 28 29 30 31 32
123456789101112131415161718192
0
21 22 23 24 25 26 27 28 29 30 31 32