Bosch FCP‑320 Series - Order Overview; Detector Variants; Detectors with 820 Ohm Alarm Resistor; Detectors with 470 Ohm Alarm Resistor

22 en | Order Overview Conventional Automatic Fire Detectors
2021.03 | 11 | F.01U.004.377
User manual
Bosch Sicherheitssysteme GmbH
6 Order Overview
6.1 Detector Variants
6.1.1 Detectors with 820Ohm Alarm Resistor
Type Number Designation Product ID
FCP-OC320 Multisensor Detector Optical/Chemical F.01U.026.292
FCP-OT320 Multisensor Detector Optical/Thermal F.01U.026.295
FCP-O320 Optical Smoke Detector F.01U.026.293
FCH-T320 Heat Detector F.01U.026.291
FCH-T320-FSA Heat Detector for Fire Barriers conforming to DIBt,
Quality-controlled
F.01U.026.294
6.1.2 Detectors with 470Ohm Alarm Resistor*
Type Number Designation Product ID
FCP-OC320-R470 Multisensor Detector Optical/Chemical F.01U.029.867
FCP-OT320-R470 Multisensor Detector Optical/Thermal F.01U.029.862
FCP-O320-R470 Optical Smoke Detector F.01U.029.857
FCH-T320-R470 Heat Detector F.01U.029.861
*Detectors with 470 Ohm Alarm Resistors are not available in all countries.
6.2 Detector Bases
Type Number Designation Product ID
MS 400 Standard Detector Base for surface-mounted and
flush-mounted cable feed
4.998.021.535
MS 400B Standard Detector Base for surface-mounted and
flush-mounted cable feed, with Bosch-branding
F.01U.215.139
FAA-420-SEAL Damp Room Seal for the MS400 and MS400B
Detector bases (1 pack = 10 pieces)
F.01U.215.142
MSR 320 Conventional Detector Base with Relay for surface-
mounted and flush-mounted cable feed
4.998.114.565
MSC 420 Additional Base with Damp Room Seal, for surface-
mounted cable feed
4.998.113.025
6.3 Detector Accessories
Type Number Designation Product ID
FLM-320-EOL2W EOL Module 2-Wire F.01U.083.619
TP4 400 Support Plate for Detector Identification up to 4m
installation height (ordering per 50)
4.998.084.709
TP8 400 Support Plate for Detector Identification up to 8m
installation height (ordering per 50)
4.998.084.710