-8-
% $
The cordless worklight runs at reduced
brightness when the battery capacity is at
approx. 1.3 %. The cordless worklight flashes
3 times before the brightness decreases.
!=/<+22/4-:.+'36+'*,/-;8+
The lamp head can be swiveled up to 200° to
suit the application.
– As an uplight with the lamp head aimed
upwards.
– Swiveled 90° to shine light into the room.
– With lamp head tilted approx. 120° for
glare-free lighting of the work area, e.g.a
desk.
– With lamp head tilted approx. 200° to
illuminate the floor.
Note: At a tilt of more than 90° the cordless
worklight has to be fixed.
#:/2/:?551,/-;8+
You can use the utility hook to attach the
cordless worklight to an object.
'8'(/4+8,/-;8+
You can use the carabiner to attach the
cordless worklight e. g. to a rope or belt.
'-4+:/)5;4:,/-;8+
You can use the magnetic mount 6 to attach
the cordless worklight to ferrous surfaces. Do
so carefully in order to avoid scratching
delicate surfaces.
"8/65*5;4:,/-;8+
You can use the tripod mount to screw the
cordless worklight onto a tripod.
To Next Page
Loading...
