16 en | Installation FLEXIDOME corner 7100i IR
2023-10 | 01 |
Installation Manual
Bosch Security Systems
5. Align the face plate with the Bosch logo on top;
6. Tighten the screws.
For video instructions scan the QR code below:
4.5 LED Status
A status LED can be seen in the camera top, above the camera lens.
Refer to the table below for the different status LED functions.
Status LED Meaning
Solid red Booting
Flashing red Resetting
Solid green Working, but stream is not being watched or
recorded
Flashing green Stream is being watched and/or recorded
Disable the status LED in the camera settings, if necessary.
1. Select Camera.
2. Select Installer menu.
3. Select Disabled in Camera LED.
To Next Page
Loading...
