Bosch FPA-1200-MPC - Switching between status bars; Logical and physical addressing

Panel Controller Operating principle | en 33
Bosch Sicherheitssysteme GmbH Operation guide F.01U.076.969 | 6.0 | 2010.04
5.10 Switching between status bars
The status bar offers further functions, display and selection options.
If the "double arrow" symbol is displayed in the status bar, it is possible to switch to the
status bar of the start menu. To do this, press the "double arrow" key on the membrane
keypad.
5.11 Logical and physical addressing
When addressing elements, there is a distinction between logical and physical addressing:
Examples:
Element with physical addressing: 5.1 - 4
Element with logical addressing: 3 - 4
Physical
Elements Modules Loop Element
Numbers 5 1 4
Logical
Elements Zone Element
Numbers 3 4