Bosch FPA-5000 - Page 86

86 en | Installation Modular Fire Panel
09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH
RS232
USB Device
IN1 / GND / IN2
2 x CAN1
2 x CAN2
CAN Bus
CAN Bus
1
2
5
6
7
8
3
4
2 x Ethernet (RJ45)
USB Host
Figure4.40: MPC functional elements
Position Designation Function
1 Touch screen Operation of the panel using virtual keys and variable
display windows
2 22 permanent keys Standard inputs
3 12 LEDs Display operating status.
The LED strip can be provided with a labeling strip. A
country-specific insert strip is enclosed with the
operating instructions.
4 Key switch Two switch positions, freely programmable, e.g. for
switching between day/night mode or activating/
deactivating local alarms
5 3 rotary switches Address setting
6 Reboot button Panel hardware reset
7 6-pin DIP switch Configuration setting
8 Grounding cable Panel controller grounding
Networking and Interfaces
The panel controller has
– 2 CAN interfaces (CAN1/CAN2) for networking
– 2 Ethernet interfaces (ETH1/ETH2) für Vernetzung
– 2 signal inputs (IN1/IN2)
– 1 USB and 1 RS232 interface
Note the maximum cable length of 2m for connection to the USB and RS232 interface.