88 en | Installation Modular Fire Panel
09.2017 | 11.3 | F.01U.028.089 System Information Bosch Sicherheitssysteme GmbH
Installation
The MPC Panel Controller can be installed in the following housings: CPH 0006 A, MPH 0010
A, HCP 0006 A and HBC 0010 A.
For installation, follow the instructions on the following pages.
Notes:
– Make sure the Panel Rail Short is installed before you install the panel controller.
– Secure the grounding cable at the screw provided on the housing (4).
– Plug the cable into the IN slot on the Panel Rail Short (6).
Caution: Connection at the OUT slot or to a Panel Rail Long is not permissible.
– Plug the terminal element for the data bus into the OUT slot on the last occupied panel
rail (8).
To Next Page
Loading...
