Modular Fire Panel Installation | en 95
Bosch Sicherheitssysteme GmbH System Information 09.2017 | 11.3 | F.01U.028.089
Figure4.48: ADC‑5000‑OPC License Key
Addressing and Settings in the Network
The panels and remote keypads are identified in the network by a unique address. This
address is set on the rotary switches and is known as the rotary switch number (RSN) (see
the figures in the circle on the circuit diagrams). The rotary switches are located on the rear of
the panel controller (see ).
Note the address on the sign below the rotary switches (see , step 2).
The DIP switches are located on the rear of the panel controller (see ).
Mark the selected setting on the sign above the DIP switches (see , step 4).
To Next Page
Loading...
