Bosch FPA-5000 - Triggering fire verification; Starting time to investigate

42 en | Product Description Modular Fire Panel
F.01U.028.089 | 5.4 | 2009.08 Product Information Bosch Sicherheitssysteme GmbH
1.15.6 IOP 0008 A Input/Output Module
The input/output module has eight independent digital inputs and eight open collector
outputs for individual controllers or displays.
Technical specifications
1.15.7 IOS 0020 A 20 mA Communication Module
The 20 mA communication module has an S1 interface, an RS232 interface (e.g. for
connecting a printer) and an S20 interface (20 mA). The FAT 2002 Fire Service Display Panel
or the THP 2020 A Thermal Printer is connected to the S20 interface. The Plena Voice Alarm
System can be connected via the RS232 interface.
Labeling Connector
OUT1-OUT8 Outputs, max. voltage 35 V DC at 1.5 A per output (nominal 0.7 A)
GND Ground
IN1-IN8 Inputs, max. voltage 5 V DC at 0.1 mA per input
GND Ground
Input voltage 20 V DC to 30 V DC / 5 V DC ± 5%
Maximum current consumption 10 mA at 5 V DC
Maximum switch-on current 700 mA (short-circuit protected, I
max
= 1.5 A)
Maximum cable length 3 m (9.8 feet)
Dimensions (H x W x D) Approx. 127 x 96 x 60 mm (5.0 x 3.8 x 2.4 inches)
Weight Approx. 150 g (approx. 5.3 ounces)
Labeling Connector
S1 IN / S1 OUT S1 interface
TX - / TX + / RX + / RX - S20 interface (20 mA interface)
AUX - / AUX + Power supply +24 V DC/max. 1.3 A
RXD/TXD/GND RS232 interface