Modular Fire Panel Product Description | en 49
Bosch Sicherheitssysteme GmbH Product Information F.01U.028.089 | 5.4 | 2009.08
FDP 0001 A Dummy Cover Plate
The dummy cover plates are needed to conceal unused module slots in the housing front
panels.
1.17 Cable sets
Overview
There are various types of cable and cable sets available to connect the central components:
Cable sets CBB 0000 A and PDC 0000 A are required if the power supply is located in a
separate power supply housing. In contrast to the standard cable sets supplied with the unit,
these sets have a longer connection cable to the battery.
PDC 0000 A Cable Set HPD/BCM/Battery
The three-part cable set is needed to connect a battery pack to the BCM Battery Controller
Module via the HPD 0000 A Power Distributor.
NOTICE!
A labeling template (for use with MS WORD 2003 or higher) is included on the software CD
enclosed with the MPC-xxxx-B Panel Controller.
Cable set Connection from ... ... to
PDC 0000 A
1)
HPD 0000 A Power
Distributor
BCM Battery Controller Module and Battery
Pair
CRP 0000 A MPC Panel Controller MPC Panel Controller (Redundant)
CPR 0001 A MPC Panel Controller RLE 0000 A Junction Board EU/RLU 0000 A
Junction Board US
CPB 0000 A BCM Battery Controller
Module
UPS Universal Power Supply
CBB 0000 A
1)
BCM Battery Controller
Module
Battery pair
CPP 0000 A HPD 0000 A Power
Distributor
UPS Universal Power Supply
CPA 0000 A MPC Panel Controller AT 2000/ENO 0000 B
1) required for power supply in a separate power supply housing
To Next Page
Loading...
